Planning A Multipoint Route - ZENEC Z-N966 Navigation User Manual

5. The route is calculated and the map appears showing the entire route, where you can
check route information and route alternatives. Tap
parameters, or tap

3.1.9 Planning a Multipoint Route

To build your route destination-by-destination, perform the following steps:
on the Navigation view to access the Navigation menu.
1. Tap
2. Tap .
3. There is only one line in the list of route points, the starting point of the route, which is
normally the current GPS position.
4. Tap
5. The New Route to... screen appears, where you can select the destination of the route
the same way as described in the previous sections.
to start your journey.
to select the destination.
45
to modify the route