Advertisement
Quick Links
CESPT824/828/829/830
Pistol Grip Screwdriver
Operation Manual
CAUTION — Please read, understand, and follow all operating and safety instructions in
this manual before using a CESPT screwdriver.
If you have any questions or concerns, please contact us at:
Delta Regis Tools Inc.
7370 Commercial Circle
Fort Pierce, FL 34951
USA
Doc. CESPT8 Series_Manual_r0.1
Copyright © 2023 Delta Regis Tools Inc
Ph +1-772-465-4302
Fx +1-772-465-4368
Email: sales@deltaregis.com
Website: www.deltaregis.com
Advertisement
Related Manuals for Delta Regis CESPT830
Summary of Contents for Delta Regis CESPT830
- Page 1 If you have any questions or concerns, please contact us at: Ph +1-772-465-4302 Delta Regis Tools Inc. Fx +1-772-465-4368 7370 Commercial Circle Email: sales@deltaregis.com Fort Pierce, FL 34951 Website: www.deltaregis.com Doc. CESPT8 Series_Manual_r0.1 Copyright © 2023 Delta Regis Tools Inc...
- Page 2 • Specific models of Delta Regis BECT series controller are designated for use with specific screwdrivers as specified on the following pages. Use of the controller (or screwdriver) with any other screwdriver (or controller) may result in malfunction, damage, or injury.
- Page 3 - Torque lock sleeve (1) - Phillips screwdriver bits (2) • Operation manual (1) Specifications Pistol Grip Screwdriver Model CESPT824 CESPT828 CESPT828F CESPT828XF CESPT829 CESPT829F CESPT829LT CESPT830 Input Voltage 40 VDC 0.3–2 0.8–3 0.8–2.5 0.8-3.5 2–5 2–5 2.6-4 2.5-7 Torque Range in-lbs 2.6–17.7...
-
Page 4: Tool Overview
CESPT824/828/829/830 Pistol Grip Screwdriver Operation Manual Tool Overview Suspension Bail Allows tool to be suspended from a spring balancer or similar device Torque Lock Sleeve Impedes access to the torque adjusting nut to prevent accidental tampering Housing Nut Remove to install a torque lock sleeve Bit Holder Pull sleeve forward to insert/remove bits Torque Adjusting Nut... -
Page 5: Setting The Torque
CESPT824/828/829/830 Pistol Grip Screwdriver Operation Manual Before you turn on the controller Insert the desired screwdriver bit into the quick change holder of the driver bit by pulling the outer sleeve of the bit holder to release the retainer. Insert an appropriate power bit, release the sleeve and ensure that the bit is properly locked in place by pulling back and forth on the bit. -
Page 6: Parts And Accessories
CESPT824/828/829/830 Pistol Grip Screwdriver Operation Manual Parts and Accessories If you require parts or accessories for your Delta Regis product, please refer to our website or contact us for further information. Service This device is not user serviceable. Any repairs must be performed by a Delta Regis authorized service center. Please consult Delta Regis Tools for further information and the location of the nearest authorized service center.