Display Elements And Symbols - VOLTCRAFT VC281 TRMS Operating Instructions Manual

8. Display elements and symbols

The following symbols and letters appear on the device/display. Other symbols may appear on the display (B) (display
test), but these have no function.
1 True root mean square
2 Delta symbol for relative value measurements
(=reference value measurement)
3 Mega symbol (exp. 6)
4 Kilo symbol (exp. 3)
5 Ohm (unit of electrical resistance)
6 Hertz (unit of frequency)
7 Nano symbol (exp. -9)
8 Milli symbol (exp. -3)
9 Volt (unit of electrical voltage)
10 Micro symbol (exp. -6)
11 Ampere (unit of electrical current)
12 Farad (unit of electrical capacity)
13 Automatic shut-off is enabled
14 Measured value
15 Diode test symbol
16 Acoustic continuity tester symbol
17 Low impedance symbol
18 Socket assignment indicator
19 Automatic measurement range is enabled
20 Battery replacement indicator
21 Hold function is enabled
22 Direct current symbol ( )
23 Polarity indicator for current flow direction (negative terminal)
24 Alternating current symbol ( )
25 Warning symbol for dangerous voltage
47