Advertisement
N8104-125A
1000BASE-T接続ボード (4ch)
1000BASE-T Adapter (4ch)
スタート アッ プガイド/ Startup Guide
Packing List
This product is shipped with the following items, verify package contents:
Items
Qty.
1000BASE-T Adapter (4ch)
1
By Default, Low-Profile sized bracket is attached
This is not included if the product is built into the
system at the time of shipment. It is listed in the
Warranty
1
warranty of "Express Server"
Bracket
1
Startup Guide
1
This document
□1000BASE-T
□ Bracket
Adapter(4ch)
□
Startup Guide
□ Warranty
NOTE: This warranty is available only for using in Japan.
Do not use it in any other than Japan.
Note
1. No part of this guide may be reproduced, transmitted, translated in any form, or converted to medias without prior
written permission
2. The contents of this guide are subject to change without prior notice.
3. All efforts have been made to ensure the accuracy of all information in this guide. If you find any part unclear,
incorrect, or omitted in this guide, contact your service representative.
4. The company assumes no liability arising from the use of this product, nor any liability for incidental or consequential
damage arising from the use of this guide regardless of 3 above.
5. This guide is created for the manager or the maintenance person who is well informed about the operation of this
device. Note that the basic information, such as the operation procedures of the device and OS, is omitted.
NEC Corporation 2010
No part of this guide may be reproduced or changed in any form without prior written permission of NEC
Corporation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
本書は再生紙を利用しています This guide is made from recycled paper.
measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
1st edition
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
CE Statement
Warning:
This is a Class B product. In domestic environment this product may
cause radio interference in which case the user may be required to take adequate
Notes
measures (EN55022).
Keep this Startup Guide at hand for quick reference at anytime
necessary. Be sure to read this section carefully.
Precautions for Use
The following includes information necessary for proper and safe operation of the
product.
Safety Indication
Follow the instructions in this Startup Guide for your safety to use this product. The server contains
components with possible danger, hazards that may cause by ignoring warnings, and preventive actions
against such hazards. The words "WARNING" and "CAUTION" are used to indicate the degrees of
danger. These terms are defined as follows:
Indicates the presence of a hazard that may result in death or serious
personal injury if the instruction is ignored.
Indicates the presence of a hazard that may cause minor personal injury,
including burns, or property damage if the instruction is ignored.
This guide uses the following three types of symbols to give indications and precautions
against a danger. They are defined as follows:
Attention
Prohibited
action
Mandatory
action
Do not plug the power cord in a nonconforming outlet
Use a wall outlet with specified voltage and power type.
Otherwise, there is a risk of a fire or current leakage.
-Be sure to read this section -
This symbol indicates the presence of a
Example
hazard if the instruction is ignored. An image
in the symbol illustrates the hazard type.
(Electric hazard)
This symbol indicates prohibited actions. An
Example
image in the symbol illustrates a particular
prohibited action.
(Do not disassemble)
This symbol indicates mandatory actions.
Example
An image in the symbol illustrates a
mandatory action to avoid a particular
(Unplug)
hazard.
Term indicating a degree of danger
Description of a danger
Symbol to draw attention
- 3 -
Symbols Used in This Startup Guide
Attentions
Indicates a risk of an electric shock.
Indicates a risk of a fire or fumes.
Indicates that improper use may
Indicates a general precaution or warning
cause personal injury.
that cannot be specifically identified.
Prohibited actions
Do not disassemble, repair, or modify
Keep the product away from water.
this product. Otherwise, there is a risk
Otherwise, there is a risk of an electric
of an electric shock or fire.
shock or ignition.
Indicates a general prohibited action.
Mandatory actions
Unplug the power cord of the server.
Otherwise, there is a risk of an electric
shock or fire.
Precautions for Safety
This section provides precautions for using this product safely. Read this section
carefully to ensure proper and safe use of the server. For symbol meanings, see
"Safety Indications"
General Precautions
Do not use the product for services where critical high
availability may directly affect human lives.
The product is not intended to be used with or control facilities or devices concerning human
lives, including medical devices, nuclear facilities and devices, aeronautics and space
devices, transportation facilities and devices; and facilities and devices requiring high
reliability. NEC assumes no liability for any accident resulting in personal injury, death, or
property damage if the product has been used in the above conditions.
Do not continue to use the equipment if you detect smoke,
odor, or noise
If the equipment emits smoke, odor, or noise, immediately unplug the power cord of Blade
Enclosure. Then, contact your service representative. Continuing to use the product in such
condition may cause a fire.
Do not insert a wire or metal object
Do not insert a wire or metal object into this product.
There is a risk of an electric shock.
Keep water or foreign matter away from the equipment.
Do not let any form of liquid (water etc.) or foreign matter (e.g., pins or paper clips) enter the
equipment. Failure to follow this warning may cause an electric shock, a fire, or a failure of
the equipment. When such things accidentally enter the equipment, immediately turn off the
power of Blade Enclosure and unplug the power cord. Then, contact your service
representative.
*856-127021-125- AO*
Advertisement
