Advertisement
Quick Links
Advertisement
Related Manuals for K2 Systems Big Foot
Summary of Contents for K2 Systems Big Foot
- Page 1 CONNECTING STRENGTH Big Foot QUICK GUIDE k2-systems.com...
-
Page 2: Kit Includes
Components Part Number Description 4000218 Big Foot 6" w/ 3"+ Chem Link Clip Kit includes: Big Foot T-Bolt and Hex Nut Chem Link Clip Material: aluminum Material: stainless steel Material: polymide Optional components: ChemLink 3" E-Curb Kit E-Curb M-1 structural adhesive/sealant... - Page 3 Choose the appropriate fasteners for your structural attachment. If needed, drill your pilot holes, seal holes, and secure the Big Foot to the roof. Attach the Chem Link Clip on the bottom half of the foot. This is used to ensure...
- Page 4 E-Curb ensuring that the inner wall is touching the Chem Link Clip. Use the ChemLink logo on the E-Curb as a guide to place the E-Curb directly in front of the bottom of the Big Foot. Press the rings firmly in place until excess adhesive extrudes...
- Page 5 Apply M-1 along the outside edge of the installed E-Curb rings and smooth it out. Also seal the connection of the two halves of the E-Curb. Completely fill the E-Curb with ChemLink's 1-Part solution.
- Page 6 The CrossRail can be installed on either side of the Big Foot, but there is a built in shelf for support on the inside of the Big Foot. To install your CrossRail to the Big Foot, insert the T-Bolt through the slot and into the side channel of CrossRail.