Microsoft Communicator Instruction Manual page 5

Instruction Manual
Correct placement for the headset and microphone is critical for the success of your Xbox
Communicator. Make sure the headset goes around the back of your head. Do not place
the headset over the top of your head.
Position the microphone
about one inch (2.54 cm)
from your mouth, and off to
one side. This will ensure
that your microphone doesn't
transmit your breathing into
a chat session.
Press the mute button on the module to turn off the microphone. If the light next to the mute
button glows green, the microphone is on, and your voice may be transmitted. If the light next
to the mute button glows red, the microphone is off, allowing you to converse privately with
others in the room without transmitting your voice.
Adjust the listening volume of the headset by rotating the volume control knob. Look for more
information on how to configure and use the Xbox Communicator within the instructions for
each individual voice-enabled Xbox game.
Step 3: Put on Your Headset
You may remove the
microphone/earpiece and
reattach it on either the left
or right side of the headset.
Step 4: Start Your Game!
5