Other Settings - Roland BRIDGE CAST Owner's Manual

Other Settings

These are the settings for the brightness of the indicators on the BRIDGE CAST as well as for what the level meters display.
1. On the menu screen, click the "SYSTEM" tab and set the parameters in the respective menus.
Menu Value
0–7 Adjusts the brightness of all indicators.
LED
BRIGHTNESS
Sets what is shown by the CH 1–4 level meters.
INDICATOR
LEVEL The volume is always shown.
TYPE
The level meters operate as a level meter that shows the input levels for each channel.
METER
The volume is shown instead when you operate the CH [1]–[4] knobs on this unit.
Normal When this is set to "Boost 1" or "Boost 2", this amplifies the headphone volume.
Boost 1
Boost 2
PHONES GAIN
[UPDATE] – Updates the system program of the BRIDGE CAST. Click the [UPDATE] button and operate by following
the instructions shown.
button
* Even with the minimum setting of "0", the indicators do not go completely dark.
* In
save mode(P.7), the indicator brightness is limited. When in this mode, the brightness does
not go above a certain level even when you increase the setting.
Explanation
System Settings
67