Output Settings; Editing The Output Audio Settings - Roland BRIDGE CAST Owner's Manual

Output Settings

This section explains about the audio output settings.
â
Editing the Output Audio Settings(P.49)

Editing the Output Audio Settings

This shows you how to set the delay time for the output audio and modify the audio that's output from the LINE OUT jack and USB
port.
1. On the menu screen, click the "OUTPUT" tab and set the parameters in the respective menus.
Menu
DELAY
LINE OUT MODE
USB OUT MODE
(MOBILE/CONSOLE)
Value
Off, On Turns the delay on/off. When this is "On", the audio output is delayed by the specified
time.
* Delay is applied to the STREAM MIX bus audio that's output from the USB port.
Correcting timing discrepancies between video and audio
When streaming games on your computer, you might notice that what you see on the
game screen is not in sync with the game sound (the audio signal that's input from the
BRIDGE CAST to your computer). By applying delay to the audio output, you can make the
timing of the video and audio match.
0.0– Adjusts the delay time (audio latency).
1000.0
ms
This selects the audio to be output from the LINE OUT jack.
MIC Mic audio (not routed through a bus)
STREAM STREAM MIX bus audio
MIX
PHONES Same audio as the headphones output
SYNC
When the connection setting for the USB port is "CONSOLE/MOBILE", this sets the audio that's output
from the USB port.
MIC Mic audio (not routed through a bus)
STREAM STREAM MIX bus audio
MIX
Explanation
Output Settings
49