Roland BRIDGE CAST Owner's Manual page 26

Adjusting the Volume (Level Meter Screen)
Name
This shows which bus is being operated.
Click the icon to mute/unmute the audio.
Icon
Drag the volume sliders to adjust the volume. You can use the cursor keys on the keyboard to fine-tune the
Volume sliders
settings.
Level meter Indicates the volume levels.
This indicates which bus is being controlled, and changes when you operate the bus selection buttons on the
BRIDGE CAST.
When the input source is "MIC"
For the mic audio (not routed through a bus) and PERSONAL MIX, use the BRIDGE CAST app to set which one is
being controlled on this unit.
Bus selection
indicator
Links/unlinks the two buses (STREAM MIX, PERSONAL MIX). This works the same as the [MIX LINK] button on
the BRIDGE CAST.
When the link is on, you can adjust the input level while retaining the volume balance for each bus.
MIX LINK
button
* When the input source is "MIC", the MIC audio (not routed through a bus), STREAM MIX bus and
PERSONAL MIX bus are linked.
2. OUTPUT
This adjusts the output volume.
You can't adjust the volume for STREAM, LINE OUT and PHONES by using the BRIDGE CAST app. Adjust the volume with the
knobs on this unit instead.
Click the icon to mute/unmute the audio.
Name Icon
PERSONAL
(*1)
STREAM
LINE OUT
PHONES
(*1) Only when the USB port connection setting is "PC"
3. Power mode
Shows the power mode(P.7) for this unit.
26
Mic signal that is not routed through a bus
* Only when the input source is "MIC"
Audio sent to the PERSONAL MIX bus
Audio sent to the STREAM MIX bus
Drag the volume slider to adjust the PERSONAL MIX bus signal volume that's
output from the USB port.
Shows the STREAM MIX bus volume that's output from the USB port (cannot
be controlled).
Shows the volume of audio that's output from the LINE OUT jack (cannot be
controlled).
Shows the headphones/headset volume (cannot be controlled).
Explanation
Explanation
Operations on this
unit
–
[STREAM] knob
[LINE OUT] knob
[PHONES] knob