Table of Contents
Advertisement
Smart7 cashless reader
3
Safety instructions
Before installing and setting up the Smart7 cashless reader, please read this guide and in particular the safety instructions carefully at least once. This
is to ensure that the contents of this guide have been understood, and the reader knows how to install and set up the cashless reader.
44072IG0101EN_Smart7_Installation-Guide_V1.0
Risk of injury
• Turn off the power to the machine before installing or removing the cashless reader.
• The installation work described in this guide may only be carried out by qualified technicians or CPI-
trained and authorized personnel.
Risk of damage to the cashless reader
• The cashless reader PCB is fitted with components that can be damaged by electrostatic discharge.
Please observe the handling instructions for components exposed to the risk of electrostatic discharge.
• The cashless reader must not be operated in the presence of flammable gases, fumes, or water.
• Never pull the connecting cable of the cashless reader from the machine when a voltage is applied.
• Keep water and other liquids away from the cashless reader. It is not suitable for use in areas where
there could be direct contact with water jets.
• When transporting the device only use its original packaging. It is only in this way sufficiently protected.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Please dispose of the device correctly at the end of its service life. Do not dispose of any part of the cashless reader by
incineration. Details regarding the return and recycling of used units and consumables can be obtained from your local
branch office.
We reserve the right to make technical modifications to the device which are not covered by this guide!
Published by CPI
Safety instructions
ix
Advertisement
Table of Contents
