Table of Contents
Advertisement
Smart7 cashless reader
6
Quick diagnostics using display messages and Status LEDs
The display models of the Smart7 cashless reader provide status, operation, and maintenance information on the on-board display (cp. Chap 6.1
"Display Messages", p. 10) whereas the Smart7 cashless reader models without display provide device status and error signals via status LEDs
(cp. Chap 6.2 "Status LED", p. 10)).
6.1
Display messages (cashless reader with display only)
The display messages below have the following meaning. Simultaneously, the status LEDs indicate the device status as well, (cp. Chap. 6.2 "Status
LED", p. 10).
Reader connected to VMC and ready
to operate
Fig. 19: Display Messages
6.2
Status LEDs
Three LEDs on the front show the cashless reader status or an error:
Status Messages
Service Mode
Exceptional Errors
AutoConfig AC WAIT
44072IG0101EN_Smart7_Installation-Guide_V1.0
Quick diagnostics using display messages and Status LEDs
Reader starting up, connection to
VMC
Ready
Starting up
No Connection to VMC or coin changer
No sale
Service mode (USB flash drive or cable connected)
Configuration update
Exception error code
Reader in auto-configuration WAIT mode
Published by CPI
Reader not connected to VMC
Reader connected to USB flash drive
or cable and in service mode
10
Advertisement
Table of Contents
