Table of Contents
Advertisement
Smart7 cashless reader models
4
Smart7 cashless reader models
The Smart7cashless reader is available in different models:
• Cashless reader with MDB VMC interface
• Cashless reader with RS-232 coin changer interface
Irrespective of the optional display, both models only differ in the interface to an MDB machine or a coin changer with RS-232 interface.
4.1
Smart7 cashless reader with MDB machine interface
The pictures below shows the front of the Smart7 MDB cashless reader with display on the left and without display on the right-hand side:
Fig. 1: Smat7 MDB with Display, Front
As shown on the center picture above, the devices have two physical interface connectors on their rear side:
G7 MDB socket
type C USB socket
4.2
Smart7 cashless reader with RS-232 coin changer interface
The RS-232 cashless readers also have two physical interface connectors on their rear side:
G7 RS-232 socket
type C USB socket
Fig. 4: Smat7 RS-232 with Display, Front
1
– With display
– Without display
– With display
– Without display
to connect to the VMC with the G7 MDB cable that comes with the package
for installation and maintenance (service interface)
to connect to a coin changer with the G7 RS-232 cable supplied with the coin changer
for installation and maintenance (service interface).
Fig. 2: Smart7 MDB, Rear Side
Fig. 5: Smart7 RS-232, Rear Side
Published by CPI
Smart7 cashless reader
Fig. 3: Smart7 MDB without Display, Front
Fig. 6: Smart7 RS-232 without Display, Front
44072IG0101EN_Smart7_Installation-Guide_V1.0
Advertisement
Table of Contents
