Preface; System Description - RS Flight Systems SCU Front Panel V2 Installation & Operation Manual

1.

Preface

Thank you for purchasing an RS Flight Systems SCU Front Panel V2. We are pleased that you have
chosen our product and are confident that it will meet all your expectations. In case of questions or
problems with the unit, feel free to contact us:
2.

System Description

The SCU Front Panel V2 is an optional extension unit specifically developed for the RS Flight Systems
System Control Unit (SCU) for BRP Rotax iS engines.
Its main functions are:
- Indication of the most important engine parameters, engine status and ECU faults
- Simple and self-explanatory operation via three push buttons
- All necessary indicator lights for Rotax iS engine operation
- All necessary switches for Rotax iS engine operation
The switching characteristics of the SCU Front Panel V2 differ from the ones for the Rotax 912 and 914
engine series. Therefore, the different engine series have an altered starting procedure. For the
starting procedure, see chapter 5. Operation. The SCU Front Panel V2 includes the control of LANE A
and LANE B as well as the Main Fuel Pump and the Auxiliary Fuel Pump via a turning switch. Further,
the System Control Unit (SCU) is controlled by the Start SCU Front Panel V2 via a key turning switch.
The SCU Front Panel V2 is shown in Figure 2-1 and Figure 2-2.
The scope of delivery consists of:
- 1x Preassembled SCU Front Panel V2
- 2x Start Key
- 2x Ring Cable Lug 0.5-1.0mm² M3
- 4x Ring Cable Lug 1.1-2.5mm² M3
- 16x Ring Cable Lug 0.5-1.1mm² M4
- 10x Ring Cable Lug 1.1-2.5mm² M4
Installation / Operation Manual
SCU Front Panel V2
RS Flight Systems GmbH
Oberer Luessbach 29-31
82335 Berg | Germany
Phone: +49-8178-8681-300
E-Mail: contact@rs-flightsystems.com
18.10.2022 | V1.02
-3-