Display Panel - RS Flight Systems SCU Front Panel V2 Installation & Operation Manual

5.2

Display Panel:

•
After switching the Start Switch to "ENGINE POWER", the Display Panel will light up and
briefly show the SCU's software version. The Display Panel will then switch to the startup
mode
•
Startup mode: In the first line, engine failure information is shown.
In the second line are shown: CMD (commanded RPM for SLPC) and RPM (actual engine
rpm).
In the last line the recommended throttle position for engine startup is displayed.
•
Normal operation mode: In the first line, engine failure information is shown.
In the second line engine data is displayed.
With the "MCR" (Master Caution Release) button, all displayed engine failure information
will be deleted.
Installation / Operation Manual
SCU Front Panel V2
18.10.2022 | V1.02
-13-