Advertisement
OPERATION OF THE DEVICE
Calling function
1. In standby mode, when you press the «Call» button on the outdoor unit, the indoor unit will ring for 12 seconds.
The display will light up and the visitor can be seen on the screen.
2. In call mode, if there is no answer, the call will be automatically hung up after 60 seconds.
3. In call mode, if you press the «Pick up» button on the indoor unit, the ringing stops and the intercom mode
starts (talk time is maximum 100 seconds). If you want to end the call, press «Hang up»: the intercom and the
display will switch off and go into standby mode simultaneously. Otherwise, the intercom will automatically
hang up after 100 seconds.
Monitoring function
1. In standby mode, press the «Monitor» button on the indoor unit, the screen will light up and allow you to see
the images of the outdoor unit. To start an intercom, press the «Pick-up» button; to stop the monitoring mode,
press the «Monitor» button on the indoor unit again. The intercom and monitor will turn off simultaneously.
Otherwise, the unit will automatically go into standby mode after 100 seconds.
Door release function
1. In intercom mode, press the «Unlock door» button on the indoor unit.
- The unlocking time is 3 seconds for an electric strike (≤500mA).
- The unlocking time is 1 second for a lock.
2. In intercom mode, press the «Unlock gate» button on the indoor unit to open the gate, the unlocking time is 2
seconds.
Adjusting the device
EN
In standby mode, press the «Settings» button (see picture below) to adjust the brightness, contrast, color, call
volume, intercom volume and melody selection (press the «Settings» button to select the setting option, then
press the navigation buttons to adjust the value of the selected item).
Other options
1. When you press the «Call» button on the outdoor unit or activate the monitoring mode via the indoor unit, the
nameplate backlight of the outdoor unit will automatically turn on.
2. In standby mode, the backlight of the nameplate of the outdoor unit will automatically turn on at night and
turn off during the day.
3. The infrared LED of the camera automatically turns on in the dark and turns off in bright light.
4
Advertisement
