Sony SLS-1A Manual page 48

Physical specifications
Enclosure
Grille
Indicators
Operating Temperature
Range (Ambient)
Cooling System
Environmental
Install
Dimensions (w×h×d)
(approx.)
Mass (approx.)
Included Accessories
24
GB
Cabinet: Extruded aluminum (powder coated)
Punching metal steel plate (Painted)
The installation angle can be adjusted either to 0 degree or to 10 degrees in the
horizontal direction by the supplied wall mounting bracket and speaker brackets.
384 mm × 92 mm × 100 mm (15
384 mm × 92 mm × 110 mm (15
4 kg (8 lb 14 oz) (with speaker grille)
Speaker grille (attached to the speaker) (1), Power cord (1),
Power cascade cable (Euro type terminal block) (1),
Ethernet cable for audio signal cascade (RJ-45) (1),
3-pin Euro type terminal block header (1), Speaker bracket (no slant) (2),
Speaker bracket (10-degree slant) (2), Speaker joint bracket (no slant) (1),
Speaker joint bracket (10-degree slant) (1), Wall mounting bracket (1),
Metal joint fitting for wall mounting brackets (1), Detachment stopper (2),
Metal joint fitting for attaching a safety wire (2), Cable clamp (2), Spacer pad A (2),
Spacer pad B (1), 4×10 screw with washer (9), Shoulder screw (2),
Operating Instructions (this manual) (1), Reference Guide (1), Warranty card (1)
Side/Back panel: Plastic
Status, Signal, LAN
0 °C - 40 °C (32 °F - 104 °F)
Cooling is passive only
Indoor only
1 / in × 3 5 / in × 4 in) (without speaker grille)
8 8
1 / in × 3 5 / in × 4 3 /
8 8
in) (with speaker grille)
8