Sprout Harmonic 3.0 Instruction Manual page 5

03.
Quick Start Guide
Connecting to Harmonic 3.0 via Bluetooth:
• Your mobile device needs to be within 10 meters
of the Harmonic 3.0
• Make sure your Harmonic 3.0 battery has a
sufficient charge
To pair your device:
1. Enter into pairing mode:
• From power off status, press and hold the
multifunction button for 5 seconds to enter
pairing mode
• From power on status, press and hold the
multifunction button for 2 seconds to enter
pairing mode
Once in pairing mode, Harmonic 3.0's LED indicator
will flash blue/red until a device is connected.
2. Turn on Bluetooth on your mobile phone/music
device*
3. 'Harmonic 3.0' will appear on your mobile phone/
music device. Select 'Harmonic 3.0' to pair
4. The LED indicating light will flash blue every
5 seconds when you are
5. Enjoy your music
*If you are not familiar with Bluetooth pairing for your
mobile phone or music device, refer to the user guide
for your mobile phone/music device for instructions to
pair a new device using Bluetooth.
08
03.
Quick Start Guide
Using AUX to connect:
Connect your Harmonic 3.0 to a smartphone, tablet
or other audio device using your 3.5mm audio wire
(AUX). Once connected, all additional controls
(volume, skip track etc) will be disabled on your
headphones. Your audio device must be used to
perform these functions.
09