Related Manuals for Balcrank 2510-010
Summary of Contents for Balcrank 2510-010
- Page 1 SERVICE BULLETIN SB2016 Rev C 4/15 Light Cord Reel Model: 2510-010 Thoroughly read and understand this manual before installing, operating or servicing this equipment. OPERATION, INSTALLATION, MAINTENANCE AND REPAIR GUIDE...
- Page 2 3. Place Hanger Bracket B inside “U” shaped 1. Do not use the 2510-010 worklight in Bracket A lining up small holes in the hazardous areas under UL specifications Brackets.
- Page 3 RELAMPING 1. Lamp specification - Phillips PL13/41 available from local dealer. 2. DISCONNECT THE UNIT FROM ITS POWER SOURCE (UNPLUG). 3. Lamp will be removed from cord end so it is not necessary to do anything at the switch end. 4.
- Page 4 For Warranty Information Visit: www.balcrank.com Balcrank Corporation Revision Log ™ Weaverville, NC 28787 Rev A - Release 800-747-5300 Rev B - Corrected UL specification on page 2 800-763-0840 Fax Rev C - Removed obsolete information www.balcrank.com SERVICE BULLETIN SB2016 Rev C 4/15...