E2S STExCP8-BG-S Instruction Manual

Call point
Hide thumbs Also See for STExCP8-BG-S:

Advertisement

Quick Links

Warnings
 USE COVER BOLTS CLASS A4-70
 DO NOT OPEN WHEN AN EXPLOSIVE
ATMOSPHERE IS PRESENT
 POTENTIAL ELECTROSTATIC HAZARD
 ALL ENTRIES M20 X 1.5
 DO NOT OPEN WHEN ENERGIZED
 IF TEMPERATURE EXCEEDS 70°C AT
ENTRY OR 80°C AT BRANCHING POINT
USE SUITABLE RATED CABLE AND CABLE
GLANDS
1) Rating & Marking Information
2.1 ATEX / IECEx / UKEX Certification
All units have a rating label, which carries the following
important information:
STExCP8-BG-S (Single Switch)
Model No.:
STExCP8-BG-D (Dual Switch)
Input Voltage:
DC Units
AC Units
series or end-of-line devices only)
STExCP8-BG-S Codes:
Ex db IIC T6 Gb Ta. -55°C to +70°C
STExCP8-BG-D Codes:
Ex db IIC T5 Gb Ta. -55°C to +70°C
Ex db IIC T6 Gb Ta. -55°C to +60°C
DEMKO 15 ATEX 1589X
Certificate No.
IECEx ULD 15.0018X
UL21UKEX2133X
ATEX Marking
Equipment Group and
Category:
CE Marking
Notified Body No.
_______________________________________________________________________________________________________________________________
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH
Document No. D204-00-001-IS
STExCP8-BG-S & STExCP8-BG-D CALL POINT
For use in Flammable Gas Atmospheres and Marine Environments
48Vdc Max
250Vac max (units without
II 2G
2813
Issue 7
16-12-2022
INSTRUCTION MANUAL
(ATEX / IECEx / UKEX / DNV GL)
STExCP8-BG
UKCA Marking
Notified Body No.
The units can be installed in locations with the following
conditions:
Area Classification Gas:
Zone 1
Zone 2
Gas Groupings:
Group IIA
Group IIB
Group IIC
Temperature Classification:
T1
T2
T3
T4
T5
T6
IP Rating:
Equipment Category:
Equipment Protection Level:
Ambient Temperature Range:
2.2 DNV GL Type Approval
The units have been tested and approved for the installation
on ships in the following locations:
Temperature:
Humidity:
Vibration:
Sheet 1 of 6
0518
Explosive gas air mixture likely to occur in
normal operation.
Explosive gas atmosphere not likely to
occur in normal operation but may be
present for short periods.
Propane
Ethylene
Hydrogen and Acetylene
450ºC
300ºC
200ºC
135ºC
100ºC
85ºC (For Dual Switch models only up to
Tamb 60°C)
IP66/67 to EN/IEC60529 and IP6X to
EN/IEC60079-0, EN/IEC60079-31
2G
Gb
-55°C to +70°C Gas Groups IIA, IIB and IIC
Class A,B,C & D (all locations including
open decks and masts)
Class A & B (all locations)
Class A (all locations except installation on
machinery such as combustion engines,
compressors, pumps, including piping on
such machinery)
www.e2s.com
Tel: +44 (0)208 743 8880

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STExCP8-BG-S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for E2S STExCP8-BG-S

  • Page 1 INSTRUCTION MANUAL (ATEX / IECEx / UKEX / DNV GL) STExCP8-BG-S & STExCP8-BG-D CALL POINT For use in Flammable Gas Atmospheres and Marine Environments STExCP8-BG Warnings  USE COVER BOLTS CLASS A4-70 UKCA Marking 0518 Notified Body No.  DO NOT OPEN WHEN AN EXPLOSIVE...
  • Page 2: Type Approval Standards

    The M12 Cap fitted to the top side of the unit is not a user serviceable part and must not be removed during installation and maintenance. _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D204-00-001-IS Issue 7 16-12-2022...
  • Page 3: Cable Connections

    Check that the earth bonding wire between the two castings For Single Switch models STExCP8-BG-S: is secure and the ‘O’ ring seal is in place. When replacing the flameproof cover casting ensure that it is square with the Max.
  • Page 4: Wiring Unit

    EOL 1 EOL 2 Fig. 5 PCB Terminal Block in Base _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D204-00-001-IS Issue 7 16-12-2022 Sheet 4 of 6...
  • Page 5  Microswitch 1 = M/S 1 Microswitch 2 = M/S 2 _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D204-00-001-IS Issue 7 16-12-2022 Sheet 5 of 6...
  • Page 6: Maintenance, Overhaul & Repair

    PFD (hazardous failure) 2.3 x 10 Proof Test Interval Up to 1 year _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D204-00-001-IS Issue 7 16-12-2022 Sheet 6 of 6...
  • Page 7 Nº: IEx 20.0051X Informações da Marca No. do Tipo da Unidade: STExCP8-BG-S, STExCP8-BG-D Tensão de entrada: Unidades CC 48Vcc Unidades CA 250Vca (apenas unidades sem série ou dispositivos de fim de linha) Códigos: STExCP8-BG-S Ex db IIC T6 Gb Ta. -55 to +70°C STExCP8-BG-D Ex db IIC T5 Gb Ta.
  • Page 8 EN60079-10-2/IEC60079-10-2: Ambientes Passíveis de Explosão - Classificação das áreas. Ambientes com pós explosivos _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, Londres W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Nº do Documento D204-00-001-IS-IEx_Emissão_B - 11/07/2022 - Folha 2 de 3...
  • Page 9 Para temperaturas ambiente altas, a temperatura de entrada do cabo pode exceder + 70ºC ou a temperatura do ponto de ramificação do cabo pode exceder 80ºC e, portanto, devem ser utilizados cabos e bucins resistentes ao calor, com uma temperatura nominal de serviço de pelo menos os valores indicados abaixo: STExCP8-BG-S Máx. temperatura ambiente 65ºC 70ºC...
  • Page 10 (Resistor polarity is unimportant) Terminals (4/5) & (6) closed Terminals (4/5) & (6) closed POSITIVE (+) COMMON POSITIVE (+) COMMON (IF DIODES SUPPLIED & CONFIGURED BY E2S) (IF DIODES SUPPLIED & CONFIGURED BY E2S) M/S 1 M/S 1 M/S 1...
  • Page 11 (Resistor polarity is unimportant) COM EOL COM EOL POSITIVE (+) COMMON POSITIVE (+) COMMON (IF DIODES SUPPLIED & CONFIGURED BY E2S) (IF DIODES SUPPLIED & CONFIGURED BY E2S) DIODE DIODE 4A - Circuit as shown in Unoperated condition 4A - Circuit as shown in Unoperated condition 4A - Circuit as shown in Unoperated condition Terminals (1) &...
  • Page 12 Terminals (1) & (4) M/S 1 and M/S 2 open Terminals (1) & (4) M/S 1 and M/S 2 open Contact E2S sales for special wiring requests Terminals (1) & (3) M/S 1 and (5) & (7) M/S 2 closed Terminals (1) &...
  • Page 13 Introduction STExCP8 [ ] [S] [P] SWITCH TYPE: [S] - Single Microswitch TERMINAL TYPE [P] - PCB RSR 03-07-2019 STExCP8 [ ] [D] [P] SWITCH TYPE: [D] - Double Microswitch TERMINAL TYPE [P] - PCB Wiring Updated for DIN rail units. 23-03-2020 EOL RESISTOR Additional Dual Switch DIN Wiring...
  • Page 14: Eu Declaration Of Conformity

    Other Standards and Regulations EN 60529:1992+A2:2013 - Degrees of protection provided by enclosures (IP code) – enclosure rated IP66 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-071_Issue_D (STExCP8) - Page 1 of 2 - QAF_252_Issue_5...
  • Page 15 This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC-071_Issue_D Quality Assurance Manager Date and Place of Issue: London 23/12/2020 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-071_Issue_D (STExCP8) - Page 2 of 2 - QAF_252_Issue_5...
  • Page 16 This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC-101_Issue_A Quality Assurance Manager Date and Place of Issue: London 24/02/2022 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC-101_Issue_A (STExCP8)- Page 1 of 1 - QAF_252_Issue_5...

Table of Contents