BendPak XPR-10AS Service Manual

Hide thumbs Also See for XPR-10AS:

Installation and operation manual (76 pages)

Installation and operation manual (92 pages)

page of 49

/ 49
Bookmarks

Quick Links

Download this manual

Service Manual

SERVICE PARTS & DIAGRAMS

BENDPAK

XPR-10AS

PRODUCT SKU

5175397

DRAWING Nº

5260562

Need help?

Do you have a question about the XPR-10AS and is the answer not in the manual?

Questions and answers

Summary of Contents for BendPak XPR-10AS

Page 1 Bend Pak product. It provides comprehensive information on identifying serviceable parts and components and assists in troubleshooting problems and performing assembly /disassembly procedures. BendPak, Inc. Corporate Office Customer Service Desk / Warranty Parts Orders Domestic Sales & Service International Sales &...
Page 2 DESCRIPTION QTY REV NUMBER 5245044 XPR-10AS LIFT SUPERSTRUCTURE 5250084 XPR-10AS PARTS BOX 5215286 XPR-10AS LOW PROFILE LONG ARM ASSEMBLY, R.H. 5215285 XPR-10AS LOW PROFILE LONG ARM ASSEMBLY, L.H. XPR-10AS LOW PROFILE TRIPLE TELESCOPING ARM 5215284 ASSEMBLY 5905109 WARNING ALI/WL 101...
Page 3 2382.0-2585.0mm DRIVE THRU [23.425-43.700in] 595.1-1110mm [40.315-58.031in] 1023-1474mm [137.008-145.035in] 3480.0-3683.9mm [133.307-141.343in] 3386.0-3590.1 SECTION B-B [106.185-114.165in] 2697.1-2899.8 144.78in 3677.5mm 1645 LEMONWOOD DR. SANTA PAULA, CA 93060 TITLE: XPR-10AS PRODUCTION LIFT VER F SIZE DWG. NO. 5260562 SCALE: 1:45 SHEET 2 OF 3...
Page 4 5245044 PROPRIETARY AND CONFIDENTIAL SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING THE INFORMATION CONTAINED IN THIS DRAWING IS 5260561 THE SOLE PROPERTY OF BENDPAK INC. ANY ASSEMBLE ITEMS AS SHOWN REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: 1:30 THE WRITTEN PERMISSION OF BENDPAK INC. IS...
Page 5 NEXT ASSEMBLY PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS ASSEMBLE ITEMS AS SHOWN 5245044 THE SOLE PROPERTY OF BENDPAK INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: 1:22 THE WRITTEN PERMISSION OF BENDPAK INC. IS...
Page 6 NEXT ASSEMBLY PROPRIETARY AND CONFIDENTIAL SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING THE INFORMATION CONTAINED IN THIS DRAWING IS 5245044 THE SOLE PROPERTY OF BENDPAK INC. ANY ASSEMBLE ITEMS AS SHOWN REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: 1:22 THE WRITTEN PERMISSION OF BENDPAK INC.
Page 7 5210211 SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS 5245044 THE SOLE PROPERTY OF BENDPAK INC. ANY ASSEMBLE ITEMS AS SHOWN REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: 1:18 THE WRITTEN PERMISSION OF BENDPAK INC. IS...
Page 8 3368 COLLAPSED 3571 EXTENDED 1645 LEMONWOOD DR. SANTA PAULA, CA 93060 TITLE: XPR-10A TOP TROUGH ASSEMBLY SIZE DWG. NO. 5210211 SCALE: 1:15 SHEET 2 OF 2...
Page 9 05/30/2018 00953 UPDATED BOM REVISION AND NEXT ASSEMBLY 02/20/2020 01107 ITEM PART DESCRIPTION QTY REV NUMBER XPR-10AS LOW PROFILE TRIPLE TELESCOPING ARM 5600994 WELDMENT 5545341 WASHER M10 x Ø20 FLAT WHERE USED 5545200 WASHER M10 x Ø18 SL XPR-10AS 5530302 HHB M10 x 1.5 x 40 FULLY THREAD...
Page 10 02/20/2020 01107 ITEM PART DESCRIPTION QTY REV NUMBER 5600995 XPR-10AS LOW PROFILE LONG ARM WELDMENT, L.H. 5545341 WASHER M10 x Ø20 FLAT 5545200 WASHER M10 x Ø18 SL WHERE USED 5530302 HHB M10 x 1.5 x 40 FULLY THREAD XPR-10AS...
Page 11 UPDATED BOM REVISION 05/30/2018 00953 UPDATED BOM REVISION AND NEXT ASESMBLY 02/20/2020 01107 ITEM NO PART NUMBER DESCRIPTION QTY REV XPR-10AS LOW PROFILE LONG ARM WELDMENT, 5600996 R.H. 5545341 WASHER M10 x Ø20 FLAT 5545200 WASHER M10 x Ø18 SL 5530302 HHB M10 x 1.5 x 40 FULLY THREAD...
Page 12 5215387 SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS 5215388 THE SOLE PROPERTY OF BENDPAK INC. ANY ASSEMBLE ITEMS AS SHOWN REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: 1:12 THE WRITTEN PERMISSION OF BENDPAK INC. IS...
Page 13 PROPRIETARY AND CONFIDENTIAL FOR 5220116 SPECIFICATIONS REFER TO PART SPECIFICATION FORM THE INFORMATION CONTAINED IN THIS DRAWING IS 5260560 THE SOLE PROPERTY OF BENDPAK INC. ANY (*)5520116 QTY FOR REFERENCE ONLY REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: 1:35 THE WRITTEN PERMISSION OF BENDPAK INC.
Page 14 1645 LEMONWOOD DR. SANTA PAULA, CA 93060 TITLE: XPR-10AS PARTS BOX SIZE DWG. NO. 5250084 SCALE: 1:25 SHEET 2 OF 2...
Page 15 5174518 NOTE: UNLESS OTHERWISE SPECIFIED. PROPRIETARY AND CONFIDENTIAL 5250268 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF BENDPAK INC. ANY 5250314 REPRODUCTION IN PART OR AS A WHOLE WITHOUT SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING SCALE: 1:30 THE WRITTEN PERMISSION OF BENDPAK INC.
Page 16 5250299 PROPRIETARY AND CONFIDENTIAL SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 5250312 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF BENDPAK INC. ANY 5250313 ASSEMBLE ITEMS AS SHOWN REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: THE WRITTEN PERMISSION OF BENDPAK INC. IS...
Page 17: Hydraulic Hose Assembly
PROPRIETARY AND CONFIDENTIAL FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 5250297 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF BENDPAK INC. ANY 5250298 ITEM 1 QTY FOR REFERENCE ONLY REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: THE WRITTEN PERMISSION OF BENDPAK INC.
Page 18 FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM THE INFORMATION CONTAINED IN THIS DRAWING IS NEXT ASSEMBLY THE SOLE PROPERTY OF BENDPAK INC. ANY (*)ITEM 1 QTY FOR REFERENCE ONLY REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: THE WRITTEN PERMISSION OF BENDPAK INC.
Page 19 PROPRIETARY AND CONFIDENTIAL FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 5250299 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF BENDPAK INC. ANY 5250312 (*)ITEM 1 QTY FOR REFERENCE ONLY REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: THE WRITTEN PERMISSION OF BENDPAK INC.
Page 20: Additional Contact Information
Tel: +86 534-5421821 No. 7, Taishan Rd., Industrial Park, Ningjin County, Shandong, China 2. Vendor Information (Or for Reference) Approved Vendor Vendor Part # Contact # AUTHORIZED COMPONENT PROVIDER 1) Ningjin Hydraulic Hose 5570129 +86 534-5421821 OR BENDPAK ENGINEERING APPROVED EQUIVALENT...
Page 21 PROPRIETARY AND CONFIDENTIAL FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 5250297 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF BENDPAK INC. ANY 5250298 REPRODUCTION IN PART OR AS A WHOLE WITHOUT ITEM 1 QTY FOR REFERENCE ONLY SCALE: THE WRITTEN PERMISSION OF BENDPAK INC.
Page 22 PROPRIETARY AND CONFIDENTIAL ASSEMBLE ITEMS AS SHOWN THE INFORMATION CONTAINED IN THIS DRAWING IS 5250297 THE SOLE PROPERTY OF BENDPAK INC. ANY ITEM 1 QTY FOR REFERENCE ONLY REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: THE WRITTEN PERMISSION OF BENDPAK INC. IS...
Page 23 PROPRIETARY AND CONFIDENTIAL ITEM 1 QTY FOR REFERENCE ONLY THE INFORMATION CONTAINED IN THIS DRAWING IS NEXT ASSEMBLY THE SOLE PROPERTY OF BENDPAK INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THREAD 5535358 WITH 5545342 ONTO CABLES FOR SHIPMENT SCALE: THE WRITTEN PERMISSION OF BENDPAK INC.
Page 24 PROPRIETARY AND CONFIDENTIAL ITEM 1 QTY FOR REFERENCE ONLY THE INFORMATION CONTAINED IN THIS DRAWING IS NEXT ASSEMBLY THE SOLE PROPERTY OF BENDPAK INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THREAD 5535358 WITH 5545342 ONTO CABLES FOR SHIPMENT SCALE: THE WRITTEN PERMISSION OF BENDPAK INC.
Page 25 PROPRIETARY AND CONFIDENTIAL DIMENSIONS SHOWN ARE AFTER PAINTING THE INFORMATION CONTAINED IN THIS DRAWING IS NEXT ASSEMBLY THE SOLE PROPERTY OF BENDPAK INC. ANY PAINT BENDPAK GRAY (RAL-7024) 20% GLOSS REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: 1:10 THE WRITTEN PERMISSION OF BENDPAK INC.
Page 26 PROPRIETARY AND CONFIDENTIAL DIMENSIONS SHOWN ARE AFTER PLATING THE INFORMATION CONTAINED IN THIS DRAWING IS NEXT ASSEMBLY THE SOLE PROPERTY OF BENDPAK INC. ANY PAINT BENDPAK GRAY (RAL-7024) 20% GLOSS REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: 1:10 THE WRITTEN PERMISSION OF BENDPAK INC.
Page 27 PROPRIETARY AND CONFIDENTIAL LOCATION WITH THE FOLLOWING : THE INFORMATION CONTAINED IN THIS DRAWING IS NEXT ASSEMBLY THE SOLE PROPERTY OF BENDPAK INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT MANUFACTURER CODE SCALE: THE WRITTEN PERMISSION OF BENDPAK INC. IS...
Page 28 LOCATION WITH THE FOLLOWING : PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS NEXT ASSEMBLY THE SOLE PROPERTY OF BENDPAK INC. ANY MANUFACTURER CODE REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: THE WRITTEN PERMISSION OF BENDPAK INC. IS...
Page 29 LOCATION WITH THE FOLLOWING : PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS NEXT ASSEMBLY THE SOLE PROPERTY OF BENDPAK INC. ANY MANUFACTURER CODE REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: THE WRITTEN PERMISSION OF BENDPAK INC. IS...
Page 30 PROPRIETARY AND CONFIDENTIAL BREAK AND DEBURR ALL SHARP EDGES 0.3mm THE INFORMATION CONTAINED IN THIS DRAWING IS 5601584 THE SOLE PROPERTY OF BENDPAK INC. ANY REMOVE ALL WELD SPLATTER REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: THE WRITTEN PERMISSION OF BENDPAK INC. IS...
Page 31 PROPRIETARY AND CONFIDENTIAL MATERIAL: HR ASTM A36 OR Q235 GB/T 700 THE INFORMATION CONTAINED IN THIS DRAWING IS 5620352 THE SOLE PROPERTY OF BENDPAK INC. ANY FLAME CUT EDGES PERMISSABLE REPRODUCTION IN PART OR AS A WHOLE WITHOUT SCALE: THE WRITTEN PERMISSION OF BENDPAK INC. IS...
Page 32 UPDATED DESCRIPTION AND SIZE OF LABEL 02/18/2020 01107 ITEM NO PART NUMBER DESCRIPTION QTY REV 5905311 BENDPAK LABEL; 4 x 38" WHITE INK 5905177 TO PROLONG LIFE OF TWO 5905555 2 POST SAFETY LABEL, ENGLISH-FRENCH DO NOT SCALE DRAWING NAME...
Page 33 ECO : 1. Engineering Specification Application: INSTALLATION MANUAL Detailed Description: Print Settings for BendPak Manuals Unless otherwise specified, use these settings for printing BendPak manuals: Size: A4 (210 to 297 mm), 8.5 by 11 inches (216 to 279 mm), or between...
Page 34 SIZE: 3” L x 3” W (75mm x 75mm) MATERIAL: 2 Mil. GLOSS POLYESTER THERMAL TRANSFER LABEL WITH A HIGH PERFORMANCE PERMANENT ACRYLIC ADHESIVE. INK: 1 COLOR-BLACK 2. Vendor Information (Or for Reference) Approved Vendor Vendor Part # Contact # Preferred Vendor OR BENDPAK ENGINEERING APPROVED EQUIVALENT...
Page 35 PART SPECIFICATION FORM BENDPAK Number: 5905109 MRP Description: WARNING ALI/WL 101C Date: 08/03/2017 ECO : 00850 1. Engineering Specification Application: ALI 2 POST SAFETY STICKER KIT Detailed Description: SIZE: ALI 2 POST CAUTION LABELS: 14” L x 8.5” W (356mm x 216mm) ALI NOTICE LABEL: 1.75”...
Page 36 Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital Lamination: Clear laminate Non-glare medium matte over-laminate for abrasion, chemical, and ultra violet protection 2. Vendor Information (Or for Reference) Approved Vendor Vendor Part # Contact # Preferred Vendor OR BENDPAK ENGINEERING APPROVED EQUIVALENT...
Page 37 PART SPECIFICATION FORM STANDARD 5905311 BENDPAK Number: BENDPAK LABEL; 4 x 38" WHITE INK MRP Description: 01/04/2021 Date: 01249 ECO : 1. Engineering Specification Application: BRANDING LABEL Detailed Description: Size: 4.25” W x 38” H (107.95mm x 965.2mm) Material: Clear Adhesive PET Thickness: 4 Mil Ink: U.V.
Page 38 Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital Lamination: clear laminate Non-glare medium matte over-laminate for abrasion, chemical, and ultra violet protection 2. Vendor Information (Or for Reference) Approved Vendor Vendor Part # Contact # Preferred Vendor OR BENDPAK ENGINEERING APPROVED EQUIVALENT...
Page 39: Instruction Label
Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital Lamination: Clear laminate Non-glare medium matte over-laminate for abrasion, chemical, and ultra violet protection 2. Vendor Information (Or for Reference) Approved Vendor Vendor Part # Contact # Preferred Vendor OR BENDPAK ENGINEERING APPROVED EQUIVALENT...
Page 40 Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital Lamination: Clear laminate Non-glare medium matte over-laminate for abrasion, chemical, and ultra violet protection 2. Vendor Information (Or for Reference) Approved Vendor Vendor Part # Contact # Preferred Vendor OR BENDPAK ENGINEERING APPROVED EQUIVALENT...
Page 41 Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital Lamination: clear laminate Non-glare medium matte over- laminate for abrasion, chemical, and ultra violet protection 2. Vendor Information (Or for Reference) Approved Vendor Vendor Part # Contact # Preferred Vendor OR BENDPAK ENGINEERING APPROVED EQUIVALENT...
Page 42: Product Data Label
300 p.p.i. for digital Lamination: Clear laminate Non-glare medium matte over-laminate (No gloss) for abrasion, chemical, and ultra violet protection 2. Vendor Information (Or for Reference) Approved Vendor Vendor Part # Contact # Preferred Vendor OR BENDPAK ENGINEERING APPROVED EQUIVALENT...
Page 43 Material: White Adhesive Paper Ink: 1 Color-Black Print Process: Offset Lithography - 200 line screen or 300 p.p.i. for digital 2. Vendor Information (Or for Reference) Approved Vendor Vendor Part # Contact # Preferred Vendor OR BENDPAK ENGINEERING APPROVED EQUIVALENT...
Page 44 3” W x 3” H (76.2mm x 76.2mm) 1 Color-Black Material 2 Mil. Gloss Polyester Thermal Transfer Label With A High Performance Permanent Acrylic Adhesive. 2. Vendor Information (Or for Reference) Approved Vendor Vendor Part # Reference # Preferred Vendor OR BENDPAK ENGINEERING APPROVED EQUIVALENT...
Page 45 Ink: U.V. protected CMYK 2/C Process BendPak lifts are supplied with concrete fasteners meeting the criteria as prescribed by ASTM E488/ Finish: Matte Overlaminate (No Gloss) E488M-18. Lift buyers are responsible for any special regional, structural, and/or seismic anchoring requirements specified by any other agencies and/or codes such as the Uniform Building Code (UBC) and/or International Building Code (IBC).
Page 46 2-Post Lifts (ALI approved) Product Decal Positioning *Max. Cap. Danger ENG- *NRTL Lifting Cap ENG- DANGER ATTENTION FRE.pdf: FRE.pdf: Size: 4"W x 8.5"H Size: 4.5"W x 3.25"H THE MAXIMUM LIFTING CAPACITY MAXIMUM LIFTING CAPACITY FOR THIS LIFT IS DESCRIBED BELOW Material: White Vinyl Pressure CAPACITÉ...
Page 47 Certification Label Serial Number Size: 3"W x 1.75"H (Order Labels from ALI) PN 5905653 A L X X S A M P L E X X N Santa Paula, CA USA www.bendpak.com MODEL NUMBER DESCRIPTION LIFT CAPACITY DATE CODE VOLTAGE...
Page 48 2-Post Lifts (ALI approved) Product Decal Positioning Santa Paula, CA USA TO RAISE LIFT: TO LOWER LIFT: www.bendpak.com 1. Press and hold UP button. 1. Press and hold UP button for MODEL NUMBER two to three seconds, moving 2. When lift is just PAST desired lift off safety locks.
Page 49 Tous BendPak lifts are supplied with concrete fasteners meeting the criteria as prescribed by ASTM E488/ CENTER OF GRAVITY midway les véhicules DOIVENT être E488M-18. Lift buyers are responsible for any special regional, structural, and/or seismic anchoring requirements specified by any other agencies and/or codes such as the Uniform Building Code (UBC) between adapters.

This manual is also suitable for:

5175397

BendPak XPR-10AS Service Manual

Quick Links

Need help?

Questions and answers

Related Manuals for BendPak XPR-10AS

Summary of Contents for BendPak XPR-10AS

Page 17: Hydraulic Hose Assembly

Page 20: Additional Contact Information

Page 39: Instruction Label

Page 42: Product Data Label

This manual is also suitable for: