Mitsubishi Electric ecodan PAR-WT50R-E Installation And Setting Manual page 12

Press or
to "1" and press
When button is pressed in the middle of
setting, the screen returns to the previous
indication.
When appears on the display, do not perform pairing. The power may be turned off
in the middle of pairing, which may lose the pairing information.
Press or
dress, and press
" " (no setting) is displayed initially. Choose a
number from 1 to 8.
After pressing
controller starts communication with the wire-
less receiver.
When using multiple wireless remote controllers in one ecodan system, be sure to set
different address for each remote controller.
When the pairing process has been success-
fully performed, "
controller and green
the wireless receiver.
11
button to set the mode number
button.
button to select a pairing ad-
button to set the address.
button, the wireless remote
" is shown on the remote
LED steadily lights on
<Pairing is successful>
Blinking (orange)
Lighting (green)