Table of Contents
Advertisement
Help
Stimulation
No Stimulation
1. Toggle the Remote Control implant power button to make sure that stimulation is ON. If the
Remote Control receives confirmation from the implant, it will flash "Stimulation On."
2. Turn up the level of stimulation from the main screen or area screens.
3. Charge the implant. When the charge is complete, try turning the stimulation on.
4. Call our Customer Service Department at (866) 566-8913 if the above steps do not solve the
problem.
Stimulation Increases or Decreases on Its Own
1. Stimulation can change depending on body position (lying down, standing or bending).
2. Always keep the Remote Control with you, so that you can adjust your stimulation levels as
needed.
Help
33
Advertisement
Table of Contents
