Basic Operation - Advanced Bionics Precision SCS Handbook

Patient System Handbook

Basic Operation

When it is not being used, the Remote Control is in a "sleep" mode. Press any button and the Remote
Control will wake up and look for the implant. Once connected, you can make adjustments. When
you are done, the Remote Control will go to sleep after 60 seconds.
Good communication between the implant and the Remote Control is very important. This is the
reason you'll often see the message "Connecting..." while you are adjusting the stimulation. This is
normal because the Remote Control continually checks for the implant.
Note: If you have trouble communicating with the implant, the message "No Response" will appear
on the Remote Control screen. See "Help" on page 33 for more information.
14