Selecting Areas (For Stimulation Control) - Advanced Bionics Precision SCS Handbook

Selecting Areas (for Stimulation Control)

1. From the main screen, press the
as necessary to cycle through your
programmed areas. Each area is given a
number (1 through 4) or a name, for example
LeftLeg.
Note: If you only have one area of control, that
area will appear each time you press
SEL 1.
2. When the named or numbered area that you
want to adjust is displayed, press
change the stimulation level for that area.
button
SEL 1
or to
The Remote Control
17