Tv Operation - Memorex MSP-TV1300 Operating Instructions Manual

1
Press the Power button to turn on the
TV.
3
Adjust the volume level by pressing the VOLUME + or –
button.
NOTES:
• When AIR/CABLE option is set to AIR, only channels
up to 69 can be selected. When set to CABLE,
channels up to 125 can be selected.
• If an invalid channel is selected, the display will revert
to the original channel.
FAQs:
Why do I only receive 69 channels, when my cable goes much higher?
AIR/CABLE option must be set to CABLE when using cable, see page 11.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.

TV OPERATION

2
PICTURE
P. LOCK
TIMER
PRESET
EXTRA
Set the AIR/CABLE Menu Option as described on page 11.
4
For proper operation, before selecting channels, they
must be set into the TV's program memory, see page 12.
Press and release the CHANNEL + or –
automatically stops at the next channel set into memory.
This will not operate if channels are not set into memory.
Direct Program Selection buttons (0 - 9)
Use these buttons to select a channel. The channel number
will appear at the top right corner of the screen.
• For Channels 1 through 9, press "0" twice, then 1-9
• For Channels 10 through 99, press "0", then the two digits
• For Channels 100 through 125, press the three digits in
14
CH NO. C8
CH DELETED
ANTENNA CABLE
AUTO PROGRAM
1
2
desired.
in order.
order.
OPTIONS
AIR: If using a VHF/UHF
antenna.
CABLE: If using Cable TV.
1
button. The TV
as