Setting The Channels Into Memory - Memorex MSP-TV1300 Operating Instructions Manual

This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into
memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. In
addition to normal VHF/UHF channels, this TV can receive up to 113 Cable TV channels.
1
1
2
Press the Power button
AIR/CABLE menu option to AIR or CABLE (see previous
page). The antenna, cable, etc. must be connected before
memorizing channels. Press the MENU button
MENU screen will appear.
3
2
1
Press the Navigation ( )/(◗) buttons
PROGRAM and then the Navigation (❖) button
confirm. The TV will automatically cycle through all the
channels and store active channels into memory.
FAQs:
How many channels will I actually receive?
The actual number of channels that can be received depends on how many channels your cable company, or local area
provides. Contact your company to determine the number of channels in your area.
Do channels need to be set into memory before using the CHANNEL + or – button?
Yes, the channels must be programmed into memory.

SETTING THE CHANNELS INTO MEMORY

PICTURE CONTRAST
P. LOCK BRIGHT
TIMER COLOR
PRESET TINT
EXTRA SHARPNESS
to turn on the TV. Set the
; the
PICTURE
P. LOCK
TIMER
PRESET
CH NO. C8
EXTRA
CH ADDED
ANTENNA CABLE
AUTO PROGRAM
to select AUTO
2
1
Press the Navigation ( )/(◗) buttons
and then the Navigation (❖) button
4
Press the MENU button twice to exit the menu.
to
12
PICTURE
P. LOCK
TIMER
PRESET
CH NO.
EXTRA
CH
ANTENNA
AUTO PROGRAM
2
to select PRESET,
to confirm.
C8
ADDED
CABLE