Roland VersaUV LEF2-300 Service Notes page 28

Cap Top Replacement
2.
Select [SERVICE MENU] > [MOTOR MENU] > [AXIS MOVE] > [FEED] and set the feed to [Y: 2.8 mm] to move the table to the
backward.
SERVICE MENU
MOTOR MENU
MOTOR MENU
AXIS MOVE
AXIS MOVE
FEED
AXIS MOVE
Y:2.8mm
3.
Turn off the power switch and remove the covers.
4.
Unlock the print-head carriage, and move it to the left by hand.
5.
Remove the light shielding tape from the adapter, which connects ink tube from the cap top and the ink tube from the
pump. Then remove the ink tube connected to the cap top from the adapter.
C AUTION
You may connect an ink tube with a wrong pump, if you remove ink tubes connected to the different pumps at the same
time. Remove the ink tubes one at a time.
[ ][ ]
[ ]
ENTER
ENTER
1-21
1
L EF 2-300