Siemens OpenAir GDE Series Technical Instructions page 3

OpenAir ™ Non-Spring Return Rotary Electric Damper Actuator
24 Vac 3-position Control
Specifications, Con't
conformity
for plenum models
Miscellaneous
Accessories
Siemens Building Technologies, Inc.
In accordance with the directive set forth by the European Union for
Electromagnetic Compatibility (EMC)
Emissions standards
Immunity standards
Pre-cabled connection
Cable length
Life cycle
Dimensions
Weight
NOTE: Neither the auxiliary switches nor feedback potentiometer can be added in
the field. Order the product number that includes these options. See
Table 1.
Rotary to linear
Rotary to linear with bracket
Conduit adapter
Shaft insert
Technical Instructions
Document No. 155-188P25
Rev. 3, August, 2001
89/336/EEC
EN 50081-1
EN 50082-2
18 AWG
3 feet (0.9 m)
Designed for over 50,000 full strokes
and 5,000,000 repositions at rated
torque and temperature
See Figure 7
1.06 lb. (0.48 kg)
ASK71.5 This kit allows a direct
coupled actuator to provide an
auxiliary linear drive.
ASK71.6 This kit allows economical
mounting of an OpenAir actuator to
a variety of surfaces. This kit should
be used in applications where the
actuator can be mounted to a rigid
surface and a linear stroke output is
needed.
ASK76.1U This kit provides the
connection between the actuator
and conduit.
ASK78.3U Shaft insert for use with
3/8-inch (8 to 10 mm) diameter
shafts. Package of ten.
NOTE: Factory installed 1/2-inch
guide must be removed
prior to installation.
Page 3