Advertisement
Available languages
Available languages
EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area.
Leave the plastic bags out their reach. The small parts pose a
choking hazard.
Materials
Cover: 100% polyester.
Padding of the structure: multilayer polyurethane foam (1 cm of 18
kg/m
, 3 cm of 30 kg/m
).
3
3
Padding
of
the
back:
(11 cm of 25 kg/m
, 3 cm of 30 kg/m
3
Padding
of
seat:
multilayer
(14 cm of 35 kg/m
, 3 cm of 35 kg/m
3
Padding of the armrests: multilayer polyurethane foam (1 cm of 18
kg/m
, 2 cm of 18 kg/m
).
3
3
Suspension: elastics strap.
Structure: plywood, chipboard and high density fiberboard (HDF)
and base en pinewood (Pinus sylvestris, origin: Poland).
Feet: steel.
Assembly Instructions
Before starting the assembly, identify all components using the
manual.
In order not to misplace components, do not discard the packaging
until complete assembly is completed.
This product must be mounted by an adult.
Plan to assemble the furniture as close to the installation location
as possible.
Mount on a clean, level surface.
Be careful of the risk of pinching / jamming when-as sembling the
different parts of the sofa.
Recommendations for use
This product has been designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Maintenance
Do not place the product near a heat source (radiator, chimney,
etc.) or a source of moisture. Heat and moisture can damage the
product.
Avoid direct and prolonged exposure of the product to solar
radiation: colors may fade.
Flip and pat the seats, backrests and lumbar cushions regularly so
that they do not wear out and do not get dirty unvenly.
Do not use abrasive products.
Vacuuming or brushing upholstery once a week: Dust
accumulation accelerates wear and dulling of colors.
Sponge up spilled liquids immediately with a clean, dry, dabbing
cloth to absorb the liquid.
Do not rub, it may damage the fabric. Color variations between
cleaned and uncleaned surfaces may appear.
To clean the non-removable fabric, dry clean.
To clean the cushions cover, please follow the maintenance
conditions mentioned on the label sewn inside each cover.
If in doubt, contact a professional for cleaning.
Keep the label with lot number, it may be useful in case
BC
of complaint.
If you have any comments or suggestions regarding this
product, assembly instructions or service received, please
enquire at your nearest store or contact us on our website at:
www.habitat-design.com or write to this address: HABITAT, 70
AVENUE VICTOR HUGO, 93300 AUBERVILLIERS FRANCE.
Fredd - 04/2022
multilayer
polyurethane
and 2 cm of 25 kg/m
)
3
3
polyurethane
and 1,5 cm of 25 kg/m
).
3
3
foam
foam
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
1
Advertisement
