INSTALL METAL PLATE TOE KICK
1
INSTALL SOUND SEAL
1
2
Refit the toe kick and mounting
plate panels.
Slide the back of the mounting plate
up or down to conceal any gaps left
between the product and floor.
Align both sound seal sheets to the
base of the dishwasher. If required, trim
excess felt.
Ensure door swing is unobstructed
before securing the sound seal sheets
to the metal toe kick plate using the
supplied double sided tape.
Ensure mounting screws are accessible
through the sound seal after fitting.
INSTALL TOE KICK
CONTINUOUS TOE KICK PANEL
1
2
Align toe kick to product and ensure all
door swing clearances have been met.
Fit panel to surrounding cabinetry
17