Download Print this page

Garden Wood Furniture Somerset 961W2 Assembly Instructions Manual

Glider 44

Advertisement

Available languages

Available languages

Quick Links

Model #
961W2
READY TO FINISH
Somerset Glider
44"
Assembly Instructions
A surface coating is vital for the protection of your
furniture. Treatment should be applied at least once or
twice a year. Look for a product that is recommended
for outdoor furniture. There are two key ingredients
available in various finishes that will extend the life of
your product: UV inhibitors and antifungal inhibitors,
sometimes also referred to as mildewcides.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
Not intended for use by children without adult
supervision
Use caution when moving bench due to swinging
legs.
Presented by Whittier Wood Products
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and
Maintaining the Beauty of GardenWood Furniture
completely before beginning.
Inspect your furniture periodically for any loose
glue joints or screws, or any other problem which
may be affecting the stability of your furniture.
Tighten or repair as needed
Production Code:
We will replace any
Rev. 11/05

Advertisement

loading

Summary of Contents for Garden Wood Furniture Somerset 961W2

  • Page 1 Model # 961W2 READY TO FINISH Somerset Glider 44" Service Policy: We will replace any parts which are defective, missing or Assembly Instructions damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
  • Page 2 961W2 Somerset Glider 44" – Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list. 3 – Back – Qty. 1 1 – Left Leg Assembly – 2 – Right Leg Assembly Qty.
  • Page 3: Tools Required

    961W2 Somerset Glider 44" ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Screwdriver, Adjustable Wrench, Mallet or Padded Hammer, Outdoor Wood Glue. FIG. 1 1) Glue three 10x40mm Wood Dowels (C) into the upper hole in each pair of holes in the Left and Right Leg Assemblies (1&2).
  • Page 4 BACK FRONT FIG. 3 3) Glue 10x40mm Wood Dowels (C) in the two outer holes in the three-hole groups in the Left and Right Glider Leg Assemblies (7&8). Attach the Glider Leg Supports (9) to the Left Glider Leg Assembly (7) with Dowels (C) and 7x70mm Hex Screws (A). Attach the Right Glider Leg Assembly in the same way.
  • Page 5 Modelo # 961W2 LISTO PARA EL ACABADO Banca Mecedora Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se Somerset de 44" dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Instrucciones para Armar Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Page 6: Lista De Piezas

    Banca Mecedora Somerset LISTA DE PIEZAS Antes de comenzar a armar, verifique que haya recibido todas las piezas que se listan en la lista de piezas que se presenta a continuación. Cant. Cant. 1 Ensamble de las patas izquierdas ..1 B Tornillo Phillips de 4x40mm .
  • Page 7 No. de modèle 961W2 PRÊT POUR LE FINISSAGE Politique de service : Nous remplacerons Balancelle Somerset toutes les pièces défectueuses, manquantes ou endommagées pendant le montage. Veuillez con- de 111,76 cm (44 po) tacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou Instructions de Montage e-mail) pour obtenir les pièces de remplacement.
  • Page 8: Instructions De Montage

    Balancelle Somerset Nomenclature des Pièces Avant de commencer, vérifier si les quantités de pièces reçues correspondent aux quantités indiquées ci-dessous. Qté Qté 1 Assemblage des pieds gauche ... . 1 A Vis hexagonale 7 x 70 mm .
  • Page 9 Presented by Whittier Wood Products In order to maintain the appearance and life of this GardenWood Furniture™ product, please follow these instructions. Finishing Tips A surface coating is vital for the protection of your furniture. Treatment should be applied at least once or twice a year.