Garden Wood Furniture Eden A-Frame 4302KFBA Assembly Instructions Manual

Model #
4302KFBA
Eden A-Frame
Nutmeg finish
Assembly Instructions
Your piece of GardenWood furniture was finished at the
factory with a tinted penetrating oil that contains both
UV and anti-fungal inhibitors. For the best results,
especially in extreme climates, apply another coat of
protective oil before using this item for the first time. A
surface coating is vital for the protection of your furniture.
Reapply protective oil at least once or twice a year.
CALL US FIRST!
Service Policy: We will replace any part that is
defective or missing at the time of purchase.
Please contact Whittier Wood Products customer
service department directly by phone, fax, mail or
email for a replacement part.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
800-653-3336
www.whittierwood.com · P.O. Box 2827 Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
Presented by Whittier Wood Products
Designed to use only with the 4301KFBA
Eden Swing.
Do not climb on or hang from the structural members
of this unit.
Always locate this unit on level ground.
For normal household use only. Not recommended
for commercial use.
Do not climb, sit or stand on this A-Frame.
Do not overload the shelves.
Unload items before you move this unit.
Before you begin your project, completely read the
Assembly Instructions and Maintaining the Beauty of
GardenWood Furniture.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40° to 90° (not on a
cold or possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
This assembly requires two people.
Do not return this item to the store.
To Order: Provide the furniture model number (upper
left corner of this page), the part letter, production
code, quantity needed, reason for replacement, your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
Outside the U.S. or Canada: 541-687-0213 · Fax: 541-687-2060
Production Code:
VN
IMPORTANT NOTES:
.
01/10