Floor Load Rating - Hitachi E590 Hardware Reference Manual

Floor load rating

If your computer room uses floor cutouts to route power and data cables, position the cutouts
toward the center of the rack. If this is not possible, position the cutouts off-center from the
rack as long as the cutout is within the allowable range and allows smooth routing and
entrance of cables. Check the relationship between the position of the cutout and the cable
openings on the rack.
Floor load rating
The floor space at the installation site must support the combined weight of all associated
component and equipment. The maximum load rating is 709 kg.
Chapter 5: Site preparation
Hitachi Virtual Storage Platform E590 and E790 Hardware Reference Guide 33