Advertisement
Available languages
Available languages
INSTALL VOLUME CONTROL TRIM - K-401
VALVE
Rotate
the
volume
counterclockwise.
Press the volume control knob onto the volume control
valve stem so the "Off" indicator graphic (smallest line) is
to the top (toward the top escutcheon detent), as shown.
Secure the volume control knob to the valve stem with the
screw.
For Round Handle: Carefully install the thin O-ring into
the first groove in the volume control knob. Fit the
uninstalled grip ring into the second groove in the volume
control knob.
For Lever Handle: Install the O-ring into the groove in the
volume control knob.
For All Handles: Press the cap onto the volume control
knob so the cap detent is in line with the "High" indicator
graphic on the volume control knob.
If needed apply a small amount of lubricant to the inside
wall of the cap to aid in assembly (a capsule of lubricant
is included in the hardware kit).
A
1012606-2-
control
valve
stem
Rotate
Counterclockwise
fully
Round Handle
Volume Control
Knob
"Off"
Indicator
Graphic
"High"
Indicator
Graphic
8
Lever Handle
Volume Control
Knob
Screw
Cap
Screw
O-Ring
Grip
Ring
Fig. #9
Kohler Co., Kohler, WI U.S.A.
O-Ring
Detent
Advertisement
