Vollrath 1694 Assembly And Use Instructions

1694
1695

ASSEMBLY

Attach Casters or Pneumatic Wheels

NOTICE: Use a wrench or torque wrench to tighten the hardware.
NOTICE: Inflate pneumatic tires to 50 psi.
NOTICE: Attach the casters/wheels with brakes in the back position
of the dolly (handle mounting end)
Swivel casters in the
back by the handle
mount
Assembly and Use Instructions
Item No.
1694
1695
1695-1
NOTICE: Weight capacity 350 lbs.
1695-1

Attach Handle

The handle is included with item 1695 and is an optional accessory for
items 1694 and 1695-1.
1. Insert the handle into the back side of the base in the upright
position. To secure the handle:
a. Place a screw through the hole in the small rectangle end of the
tethered cable.
b.Insert the screw into the top hole located on the left side of the
Fixed casters in
base, above the back wheel. It should pass through the upper hole
the front
in the handle and be secured underneath the base with the pro-
vided lock nut. Repeat on the other side.
2. Insert the pin end of the tethered cable into the bottom hole to keep
the handle in an upright position. Repeat on the other side.
©
2020 The Vollrath Company L.L.C.
Flatbed Utility Dolly
Description
Flatbed Utility Dolly, gray with 5" casters and
straps
Flatbed Utility Dolly, gray with 6" pneumatic
wheels and straps
Flatbed Utility Dolly, gray with 6" pneumatic
wheels, straps, and handle
Part No. 352387-1 9/3/20