Place Setting Load; Upper Rack - Maytag Jetclean III MDB9750AWW Use And Care Manual

Loading

10 Place Setting Load

Upper Rack

1 saucer
is loaded
behind
dinner
plates.
Middle Rack
Lower Flexload
Upper Rack
Glasses, cups, stemware,
light-weight plastics,
plates, bowls, pans, long-
handled utensils etc. can
be loaded in this rack.
Do not load glasses
over the tines.
The Stack-Rack (select
models) on the right
side of the upper rack
folds up or down for
loading flexibility. Fold it
down to hold long-
handled knives, spatulas
and spoons or short
™ Rack
items like cups or juice glasses. Fold it up for taller
items like glasses, bowls, plates, etc.
The edge of the Stack-
Rack (select models) is
designed to hold
stemware in place. Taller
stemware will fit better on
the right side as the upper
rack is deeper on this side.
The Folding Tines (select
models) located in the front
right corner provide
convenient loading space
for large, bulky items like
pots and pans or mixing
bowls.
To lower tines, carefully
push the tines out of each
holder toward the center
of the rack and lay the
tines down.
The Cup Clips (select
models) located in the
center of the upper rack
can be used to hold light-
weight plastic items,
cooking utensils, knives,
etc. in place. Clip the item
between the tine and the
clip.
The Vari-Lock ™ Snugger
(select models) on the left
secures lightweight items
in place. It can be adjusted
by grasping the wavy wire
and rotating it left to snug
items against the outer
rack or to the right to rest
on top of light items. Do not load items on top of
the wire.
For best results with tall
glasses, rest the bottom of
the glass against the wavy
wire of the Vari-Lock
Snugger (select models).
3
™