Maxent MX-27X2 Owner's Manual page 38

Picture Controls
Picture-in-Picture / Side-by-Side Picture (Con't)
Main and Sub-Window Swap
You can swap the main picture and sub-picture.
Press the key once to swap. Press the
key once again to switch back.
Changing Location of PIP Image
There are four preset positions where the PIP sub-window can be positioned. Once the PIP mode is turned on,
you can switch the PIP sub-picture position to any one of the four corners of the screen.
Press the key to switch positions.
Pressing the
through all four corners of the screen.
38
key repeatedly will cycle
Sub-Picture Positions
Picture
Swap
Default
Position