Maxent MX-27X2 Owner's Manual page 37

Selecting Signal Source for Sub-Picture
Various signal sources can be displayed within the sub-window under PIP and Side-by-Side picture modes. To
select the input source for sub-window, please follow the steps below.
Once the PIP mode is turned on, you can
change the sub-picture input source by press-
ing the key.
Pressing the
through all available inputs for the sub-picture.
Selecting Signal Source for Main Picture
Once the PIP mode is turned on, you can
change the main picture input source by
pressing the
DIRECT INPUT KEYS.
Available PIP/POP Input Combinations
Main-picture and sub-picture input combinations are listed below for reference.
Note:
All digital TV signals (480i, 480p, 720p, 1080i) received via Component 1 or Component 2 inputs can
be displayed in combination with TV or AV inputs.
key repeatedly will cycle
key or any one of the
Picture Controls
Note:
Please see reference table below for available
PIP/POP input combinations.
Source
Select
Input Select
(Toggle)
Direct Input
Selection Keys
37