Makita DCO180 Technical Information page 6

R
epair
[3] DISASSEMBLY/ASSEMBLY
[2]-2. Bearing box complete (cont.)
DISASSEMBLING
(7) Bearing box section is removed as drawn in Fig. 15.
Fig. 15
Spindle complete
Compression
Shaft lock spring 7
ASSEMBLING
(1) Assemble by reversing the disassembly procedure.
(2) Pressfit Ball bearing 6002DDW into Bearing box complete, and
fit Retaining ring 32 into the bearing box. (See Figs. 13 and 12.)
(3) When you pressfit Spindle complete into Ball bearing 6002DDW
in Bearing box complete, receive the ball bearing 6002DDW with
1R029 as drawn in Fig. 16.
[2]-3. Assembling of Yoke unit
Assemble the notch of Yoke unit to the projections of Housing L. (Fig. 17)
Ball bearing
6002DDW
Retaining ring
R-32
Retaining ring
S-15
Bearing box
complete
Fig. 17
Notch of Yoke unit
Projections of Housing L
Fig. 16
P 6/ 8
Arbor press
Spindle complete
1R029