CHAPTER 2 CONNECTION
When using the external sense clips, connect them in the following order.
(1) Turn off the power of the target system and IE-784000-R, in that order.
(2) Attach the IC clips (sold separately) to any IC to be traced on the target system.
(3) Connect the external sense clips to the IC clips attached.
(4) Turn on the power of the IE-784000-R and target system, in that order.
Figure 2-4. Connection of External Sense Clip
External sense clip
IC clip
IC
Target system
Remark When connecting the external clips, use the IC clips wherever possible. This will prevent mis-connection
and improve operability.
55