Beko WTV7825XCW1 User Manual page 24

4
e
huh
d
s
h
w
l
I
w
d
m
e
r
B
v
b
go away
a
• V
ac
b
ve
• A
d
and
like this
• D
w
ten e
to pump away:
1
Remove the plug from the socket to
disconnect the power supply.
a
PAY ATTENTION!
• The temperature of the water in the
machine can reach 90 ºC. To avoid the
risk of fire, the filter must be cleaned
after the water in the machine has
cooled down.
2. Open the filter cover.
24 / NL
a
Pull the emergency drain hose out of its seat.
b
Place a large container near the end of the
hose. Drain the water into the container by
removing the plug at the end of the hose.
Block the hose supply by replacing the plug
when the container is full. After the
container has been emptied, repeat the
above procedure to completely drain the
water from the machine.
c
Once the water has drained, close the
end with the plug and secure the hose in
place.
d
Turn the pump filter and remove it.
4. Clean all debris in the filter as well as
fibers, if any, around the pump impeller.
5. Replace the filter.
6. If the filter cover is in two pieces, close the
filter cover by pressing the tab. If it is a
piece, first put the tabs in the lower part in
place and then push the upper part to
close it.
Washing Machine / User Manual
expensive for water
drain hose
g to pump: