Special Programs - Beko WTV7825XCW1 User Manual

4.3.7 Special programs

For specific applications, select one of the
following programs.
• To rinse
Use this when you want to rinse or starch
separately.
• Spin + Pump
Use this program to remove the water on
the clothes/in the machine.
Before selecting this programme, choose the
desired spin speed and press the start/pause
button. The machine will first pump out the
water inside. It will then spin the laundry at
the set spin speed and pump out the water
that is released.
If you only want to drain the water without
spinning your laundry, select the Drain+Spin
program and select the No Spin function
using the spin speed adjustment knob. Press
the start/pause button.
C
INFORMATION
• Use a lower spin speed for delicates.
4.3.8 Temperature selection
Whenever a new program is selected, the
recommended temperature for that
selected program will appear on the
temperature indicator.
To lower the temperature, press the
"Temperature Adjustment" button again.
The temperature will gradually decrease. If
cold water is selected, the temperature
lights will remain off.
C
INFORMATION
• If the program has not yet reached the
heating process, you can
temperature without putting the
machine in Pause mode.
4.3.9 Spin speed selection
When a new program is selected, the
recommended spin speed of the selected
program is shown on the spin speed
indicator.
To decrease the spin speed, press the
button to adjust the
18 / NL
spin speed. The spin speed will gradually
decrease. Then, depending on the product
model, "Rinse Hold" and "No Spin" options
appear on the screen. If "No Spin" is selected,
the rinse level lights will not come on.
rinse hold
If you do not want to remove the laundry
immediately after the programme, you can
use the rinse hold function and leave your
laundry in the last rinse water to avoid
creasing when there is no more water in the
machine. After this phase, press the start/
pause button if you want to drain the water
without spinning your laundry. The program
will resume where it left off, drain the water
and finish.
If you want to spin the laundry in the water,
adjust the spin speed and press the start/
pause button. The program will resume. The
water is drained, the laundry is spun and the
program ends.
C
INFORMATION
• If the program has not yet reached the
spin cycle, you can adjust the speed
without pausing the machine.
4.3.10 Selection of auxiliary functions
Select the desired auxiliary functions before
starting the program. You can also select or
cancel auxiliary functions that suit the running
program while the machine is in operation
without pressing the start/pause button. To do
this, the machine must be in a step before the
auxiliary function you want to select or cancel. If
the auxiliary function cannot be selected or
cancelled, the relevant function light will flash 3
times to warn the user.
C
INFORMATION
• If, before the machine starts, a second
auxiliary function does not match the first
selected one, the first
selected function will be canceled and the second
auxiliary function will continue to operate.
• An auxiliary function that is not compatible
with the program cannot be selected. (See
"Table of program and consumption")
• The auxiliary function buttons may differ
depending on the model of your machine.
Washing Machine / User Manual