Optical Digital Audio - Coby DVD-53 Instruction Manual

Digital Output can be output in two formats: Raw or PCM. For more
information, please see the "Setup > Audio Settings" section of this
manual or refer to your amplifier's documentation.
Set the amplifier to the output mode that corresponds to the DVD
player. Refer to the amplifier's user guide for help

Optical Digital Audio

The DVD player is equipped with an Optical Digital Audio output located on
the rear panel. Connect the player's digital audio output to an amplifier with
digital decoding capabilities.
Digital Output can be output in two formats: Raw or PCM. For more
information, please see the "Setup > Audio Settings" section of this
manual or refer to your amplifier's documentation.
Set the amplifier to the output mode that corresponds to the DVD
player. Refer to the amplifier's user guide for help
Page 0 Page 0
CONNECTIONS
Component, Composite, or
S-Video Connection
To Optical Digital Audio Input of
Digital Decoding Amplifier
Optical Digital Audio
TV with AV Input
Digital Decoding
Amplifier
Coby Electronics Corporation Coby Electronics Corporation