Camera Setup; Basic Camera Setup; Camera And Frame Grabber System Setup - Uniq UM-400 User Manual

2. Camera Setup

2.1 Basic Camera Setup

For basic camera setup, as shown in Figure 1, one UM-400/UM-401 camera, one standard C-mount lens, one TV
monitor, one PS-12C power supply unit or equivalent, and one BNC cable (75Ω) are required. Make sure the
camera has the correct settings before powering up. See section 3 for details.
Figure 1. Basic Camera Setup

2.2 Camera and Frame Grabber System Setup

A basic camera and frame grabber system setup, as shown in Figure 2 below, requires a UM-400/UM-401
camera, a standard C-mount lens, a PS-12C power supply, a PC system and VGA monitor, a frame grabber or
interface card, and an external trigger device if necessary.
Figure 2. Camera and Frame Grabber System Setup
4