Setting/Calling A Patrol - HIKVISION HWI-B120H-U User Manual

• Zoom in or out.
• Refocus the lens.
5. Click to finish the setting of the current preset.
6. You can click
 Calling a Preset:
This feature enables the camera to point to a specified preset scene manually or when
an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click
preset.
Or you can place the mouse on the presets interface, and call the preset by typing the
preset No. to call the corresponding presets.

Setting/Calling a Patrol

Note:
No less than 2 presets have to be configured before you set a patrol.
Steps:
1. Click to enter the patrol configuration interface.
2. Select a path No., and click
3. Select the preset, and input the patrol duration and patrol speed.
4. Click OK to save the first preset.
5. Follow the steps above to add the other presets.
Network Camera User Manual
to delete the preset.
Calling a Preset
to add the configured presets.
45
to call the