Advertisement
PREPARATION
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key.
1
Step 1: attach right side (E) to the top back (A) and back (B).
Then attach support L (F) and support S (G) to the right side (E)
as shown on the picture by using the Allen Bolt (H1) and tighten
with the Allen Key (H4). Continue with the left side (D) in the same
way. Make sure to tighten all bolts (H1) before you continue with
step 2.
2
Step 2: put the seat (C) inside the chair as shown on the picture
and use the screws (H2) to attach it to the chair by using
a screwdriver.
Advertisement
