Advertisement
PREPARATION
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key.
1
Step 1: attach right side (E) to the top (A) and back (B). Then attach
support S (G) and support L (F) to the right side (E) as shown on
the picture by using the Allen Bolt (H1) and tighten with the Allen
Key (H4). Continue with the left side (D) in the same way.
Make sure to tighten all bolts (H1) before you continue with step 2.
2
Step 2: put the seat (C) inside the bench as shown on the
picture and use the screws (H2) to attach it to the bench by
using a screwdriver.
Advertisement
