Cooking With Steam; Adding Hot Air + Steam Cooking Mode - Baumatic BCS460SS-AUS Instruction Manual

Cooking with steam

IMPORTANT: This process MUST be followed when you are using a
cooking function that involves steam.
o Fill the water jug with distilled water, or if this is unavailable cold
drinking water.
o Fill the water jug up to the 1.2 litre mark. DO NOT fill the jug
right to the top. Otherwise the water that is pumped back into
the jug at the end of a cooking cycle may overflow.
o Insert the water jug into the water jug compartment.
o Push the water jug down completely, this ensures a perfect seal
between the tube located in the jug and the hydraulic circuit
inside of the oven.
o ALWAYS ensure that the NON perforated drip pan is inserted
underneath the perforated tray. This will catch any condensation,
juice or food that falls from the perforated tray.
o If you are using a cooking function that doesn't involve steam,
then you can leave the water jug inside of the water jug
compartment. It will not affect the cooking abilities of the oven.
Adding steam during hot air + steam cooking mode
The hot air + steam cooking mode allows you to add steam at any
time during cooking. This allows you to maintain the right degree of
humidity inside of the oven cavity.
o Once the hot air + steam cooking mode and a temperature have
been selected, the message PRESS
appear on the display.
o If you press the confirm button the
appear on the display, to indicate that the steam
generator is active.
o After a few moments, steam will begin to flow into the oven
cavity. The steam is introduced into the cavity periodically, with
brief pauses in between for up to 15 minutes.
o When the
in operation.
o It is possible to switch off the steam generator before the 15
minute period has elapsed, by pressing the confirm button again.
symbol goes out, the steam generator is no longer
TO ADD STEAM will
symbol will
20