Dahua Technology DH-PFR4K-B240 User Manual page 83

Function
Mobile Push
Click Save.
Step 3
4.5.5.3 HTTPS
Create certificate or upload the authenticated certificate, and then you can connect through
HTTPS with your PC. The HTTPS can ensure safety of data communication, user information, and
radar with reliable technology.
Step 1 Create a certificate or upload the authenticated certificate.
If you need to create certificate, follow the steps below.

1) Select Setting > System > Safety > HTTPS.
The HTTPS interface is displayed. See Figure 4-64.
2) Click Create.
Enter the required information and then click Create.
3)
If the operation is correct, then the Create Successful prompt is displayed.
The entered IP or Domain name must be the same as the IP or domain name of the
radar.
4) Click Install. The certificate begins to be installed. See Figure 4-65.
Description
decryption.
Encryption function is not supported when transmitting audio and

video date between the radar and the third party platform and
device. To ensure data security, we recommend you to disable CGI
service, Onvif service, and Genetec service.
Enabled by default. The system will send the snapshot that was taken
when alarm is triggered to your phone.
Figure 4-64
77
HTTPS (1)
User's Manual