Dahua Technology DH-PFR4K-B240 User Manual page 63

Step 2 Configure parameters as needed. For details, see Table 4-19.
For other parameter descriptions, see Table 4-18.
Parameter
Event Type
Enable
Capacity
Limit
Click Save.
Step 3
4.3.2.2 Network
When any abnormality happens to the network, the alarm will be triggered.
Step 1 Select Setting > Event > Abnormality > Network.
The Network interface is displayed. See Figure 4-40.
Step 2 Configure parameters. See Table 4-20.
For other parameter descriptions, see Table 4-18.
Parameter
Event Type
Enable
Click Save.
Step 3
Table 4-19 SD card parameter descriptions
Description
Select SD card abnormality from no SD card, SD card error, and capacity warning.
Select Enable check box to enable SD card abnormality detection.
This parameter is available when Capacity Warning is selected in Event Type.
Configure the free space percentage, and if the free space in the SD card is lower
than the defined percentage, the alarm is triggered.
Figure 4-40
Table 4-20 Network parameter description
Description
Select network abnormality from disconnection and IP conflict.
Select Enable check box to enable to network card abnormality detection.
Network
57
User's Manual